ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use

ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use
ZEKOO Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, Flat Track Roller, Low Ceiling (11 FT Single Track Bypass). ZEKOO Hardware have devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the most appropriate choice Our instructions step by step with fractional measurements in inch, have detailed word instructions with pictures 1.

Mark and drill track and bracket holes Single track, 25.5ft=11ft long sliding track with joints, Pre-drilled 16 apart holes on trackKeeping the tracks level is VERY IMPORTANT2 X 5.5FT tracks1 X track junction plate 2. Drill hole on door and attach inside door hanger Door weight capacity is 200lbThe single track bypass hardware is use for double door, door thickness is 1-3/8" 1-3/4"2 X straight hangers 4. 2 X bending hangers Read more 5. Install Door Stoppers with wrench Stopper can prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safetyRubber covered, good damping effect, reduce the noiseUse 2 screws to fix stopper on track, it is very fasteningYou can put it on track where you want to stop your door, easy to remove if you want adjust2 X stoppers 6.

Hang your door and install Anti-jump Pad on top of door Anti-jump Pad can prevent door to be lifted off rail, ensure the stability and safetyInside door use the circular anti-jump padsOutside door use the special production anti-jump pads4 X anti-jump pads 7. How to choose size Track's length should be at least of the opening (you can use the track which is a little bit longer). For example, if your opening is 132'' wide, you will need at least 144'' long track, and please let your two door width than your opening about 10''-12''The gap between inner door&wall is about 5/8'' , the gap between two door panels is about 1-3/16'' (based on door thickness: 1-9/16'')Ceiling space from top of the door to ceiling only need 6'' Read more About some questions Q: Can i cut the track? A: Yes, you can cut it into any length of you want Q: How about If the studs don't line up with the pre-drilled holes in the rail or there is a doorway trim?

A: You can add a headboard Q: How width from outside door to wall? A: It is 5'' Q: Do you accept customization? A: Yes, We are professional factory, accept mass customization About our product High purity bearing steel Gcr15 (Special material for bearing), ensure smooth sliding and stand wear and tear The material is heavy duty high carbon steel, thickness is 1/4'' We have large processing factory and advanced equipment excellent professional design, production and workmanship Only the hardware is for sale, door is not included Single track bypass barn door hardware can help you save space, easy complements your kitchen, wardrobe, bathroom, bedroom, storeroom Read more.

NoticeThis is single track bypass, one track hang 2 doors, the roller diameter is 2-1/5'', so the door will be have 7''-8'' distance overlap, so please let your door bigger than your opening, the 2 rollers will be hit together when one door slide, maybe drive other door slide. Main Material & SurfaceBlack frosted, heavy duty high carbon steel, corrosion protection, environmental protection, non-pollution. Low CeilingDouble door install on single track as bypass kit, only need 6'' space from top of door to ceiling, it's as easy to install as a conventional barn door hardware, not have tedious installation steps. Track's hole: standard 16 inches; 2. Track and hanger thickness: 1/4 inches; 3. Screws: 8.8 grade high strengh bearing capacity; 4.

Stopper: rubber covered, good buffer effect, reduce the noise; 5. Floor guide: No slotting required. Safety-Roller BearingUse high purity bearing steel Gcr15, passed the test of opening - closing for 100000 times, wear-resisting, ensure the smoothly of the move and the wheel's fluency. Roller Surface use nylon covered, very quietly. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you.

Package Dimensions: 67.2 x 8 x 3.2 inches. Size: 11 FT Single Track Bypass. Date First Available: September 6, 2018. Domestic orders that are identified as going to a. May be subject to cancellation.

We do not guarantee and are not responsible for items received in the final destination in damaged condition. Excluded item due to country restrictions, your order will be cancelled.

Please note that if an item arrives in. We may, in some cases, be able to offer replacement pieces or a full replacement. Not guaranteed to be compatible or supported in every country. If you are unsatisfied with your order.

And we will work with you to resolve it to your satisfaction. The item "ZEKOO Bypass 11FT Sliding Barn Door Hardware Kit Single Track Double Door Use" is in sale since Sunday, October 25, 2020.

This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "world*shop" and is located in United States. This item can be shipped to United States.


Homepage    Sitemap    Contact Form    Privacy Policy    Service Agreement