ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, One-Piece Rail, Flat Track Roller, Low Ceiling. Single Track Bypass System Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily. Why Choice Bypass Barn Door Hardware Kit1. Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. One full piece 6.6ft rail and Pre-drill 16 apart hole on rail to line up standard studs.
Heavy duty construction ensures safetyMaterial thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise. The hanger wheel surface is covered with nylon, slide very quietly.
Single Track Bypass Sliding Barn Door Hardware Package include 1 x 6.6FT Rail, 5 x spacers, 4 x Rollers, 2 x Door Stops, 4 x anti-jump pad, 2 x Floor Guides, 1 x Installation Manual (step by step with fractional measurements in inch, very easy to install)--Only bypass barn door hardware for sale, barn door is not include. Fit for 1-3/8" to 1-3/4" door panel thickness. S warehouse, any problem in using it, our professional staff in the barn door hardware field will answer questions for you in 24 hours. Use for double door 2. The opening's two sides don't have enough space for sliding 3.
Save ceiling spacer, only need 6'' from the top of your door to the ceiling 4. Door weight capacity: 200lb 5.Door thickness for: 1-3/8" 1-3/4"(35mm45mm) 6. We are professional factory, accept custom-made 6.6 FT(79 inches) kit's included Total track: 1pc6.6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track's length should be twice of your door panel's width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8'' , the gap between two door panels is about 1-3/16'' (based on door thickness: 1-9/16'') 4.
Height from the top of the door to the ceiling is about 6''. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging.
We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item "ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden D" is in sale since Wednesday, July 7, 2021. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "dinomerah" and is located in Phoenix, Arizona.This item can be shipped to United States.