Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4

Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4
Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4

WINSOON 8FT Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4-18FT for Choose. Craftsmanship, excellence and innovation are our primary pursuits.

We enjoy the working with raw materials to make them into something extraordinary. Trustful quality and workmanship is what you can expect when you choose WINSOON. We lead the way in sliding barn door hardware and we invite you to create something unique. The hardware kit is for d. Doors Thickness fit for: 1 3/8 - 1 3/4 inch (35mm - 45mm). Track's length should be t. Of your door panel's width, please select the length based on the door panel or opening. The distance from the top of the door to ceiling is about at least 5.9inch/15cm. 2 x 4FT Track: With pre-drilled 16 apart holes for wall attachments.

6 x Track & Wall Connector: Mount track to wall. 4 x Door Stoppers: Keep rollers on track. 4 x Steel Hangers: For use with door. 2 x Floor Guide: Keep door in its position.

4 x Anti-Jump Pad: Prevent door from falling down. 1 x Installation Manual: Help you install your barn door easily. And other Screw parts for you to assemble. Q: How much space do I need above the doorway? A: You will need a minimum of 6 clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.

Q: Can I cut the rail to fit my place? The rail can be cut to any length.

We recommend using an angle grinder to cut the rail. Q: What hardware is required if I want to install more doors? Usually the set of the hangers includes the stops, floor guide and the anti-jump end to install one more door. Q: I have a 48 opening, will this 8ft hardware work for me?

Track's length should be twice of your opening or door panel's width, please select the length based on the door panel or opening. Q: How to deal with if the studs don't line up with the pre-drilled holes in the rail? A: Attach a 1 thick header board into your studs first, and then mount the rail onto the header board. Q: How to deal with if there is a doorway trim?

A: Attach a header board with the same thickness as your doorway trim into your studs first, and then mount the rail onto the header board. Rail is made by solid 1/4 thick carbon steel, connected by a junction plate, coming with pre-drilled holes of 16 inch spacing, finished with highly durable black powder coating. The strap of the hanger is made by 1/4 thick carbon steel and the wheel is made by POM nylon, very durable and smooth. Our hangers come with to accommodate door's thickness between1 3/8" to 1 3/4".

With lag bolts and the spacers, the rail can be securely attached to the studs and can hold 230lbs comfortably. Our bolts can be used to both wooden wall and concrete wall.

You could install it to anywhere of the rail, and they're cushioned by rubber caps for a quiet close. T-shaped floor guide is supplied (with screws) to prevent the door from swinging out or up against the baseboard. BRAND: WINSOON; Condition: 100% New; Material: High Quality Carbon Steel; Surface: Frosted Black, Water Proof, Rust Proof; Door Weight Capacity: 230 lbs(2 doors' weight); Fit door panel width: each 24"; Perfect for door panel thickness: 1 3/8" to 1 3/4. TWO-PIECE Track: Two full 4 FT/48 track is included in the package.

Others provide 3 short tracks and then connect them with track connectors, which is structurally less strong, more difficult to install, and requires a track connector. PACKAGE INCLUDE2x4FT Track, 6xTrack Support, 4xRoller, 4xDoor Stopper, 4xAnti-Pad, 2xDoor Guide, 1xHex Wrench; All other necessary hardware is included as you see in the pictures.

The track has been predrilled holes for 16 inch stud; ONLY the hardware is for sale, DOOR IS NOT INCLUDED. INSTRUCTIONSVery detailed and visual instruction. Based on our own installation experience, We write the instuction, it explains every step with words and picture and all data is measured in inch.

It is very easy for you to take a reference during the installation. WINSOON is the manufacture of the sliding door hardware. If you are not satisfied with this product, we can provide you the USA return address.

Product Dimensions: Length: 4.0in Width: 5.0in Height: 60.0in Weight: 23.5 pounds. Package Dimensions: Weight: 23.5 pounds. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses. Message us for return instructions.

All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have. The item "Winsoon 8Ft Antique Double Sliding Barn Door Hardware Roller Track Kit Black, 4" is in sale since Saturday, June 1, 2019. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "itzismil_0" and is located in San Jose, CA. This item can be shipped to United States.


Homepage    Sitemap    Contact Form    Privacy Policy    Service Agreement