WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty

WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty
We do not accept P. BOXES - PLEASE PROVIDE A PHYSICAL ADDRESS.

We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country. In case it's not stated in the description, do ask us. We guarantee that your issue will be solved quickly.

We usually respond within 24 hours on weekdays. Doors are not included, only the hardware kit is for sale. You will need 6 clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Fit for door panel thickness: 1-3/8" to 1-3/4". This single rail bypass hardware kit can hold door weight 230lbs.

The gap between door and wall is 5/8" and between door and door is 1-3/16" based on 1-1/2 thick door. Hnager: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly.

Test beyond 120,000 rolls. You can use it for a long time! Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber caps ensure a quiet close. Anti-jump Pad: Prevent door be lifted off rail.

Install them on the top of your door, the anti-jump pad and the roller can hold the rail once the door hit the stopper. Two installation methods give you the option, allow you to not need to open a slot on the door bottom. The floor guide can prevent the doors from swing, allow you to open and close your door freely.

ONLY the hardware is for sale, doors are NOT INCLUDED. Q: How do I know the length of track I need for my opening? A: Usually track length should be equal to your total two doors width or opening. For example, if you have two doors that are each 48'' wide.

You will need 2 x 48'' = 96'' long track. Or if you have a opening that is 60'' wide, you will need at least 60'' long track. Q: Can I cut the rail to fit my wall? A: Yes, the rail can be cut to any length. We recommend using an angle grinder to cut the rail.

Q: What is the weight capacity? A: Your door limited 230lbs. Q: What is the compatible door thickness? Note: If you have door thickness that falls out of this range, please let us know your exact door thickness so that we can put shorter hex bolts for your thinner doors or longer hex bolts and spacer extenders for your thicker doors. Q: What is the minimum clearance required above door?

Q: When do I need a headboard?? If the pre-drilled holes in the rail don't line up with your wall studs. If there is a doorway trim.

Attach a header board with the same thickness as your doorway trim into your studs first, and then mount the rail onto the header board. [PACKAGE INCLUDE] - 2 x 5ft Rail, 1 x Junction Plate, 8 x Rail Support, 4 x Rollers, 2x Door Stops, 2 x Floor Guides, 1 x Installation Manual. ONLY THE HARDWARE IS FOR SALE DOOR NOT INCLUDED - [The 10FT Rail] - Connected by two 5FT rail with a junction plate; Pre-drill 16" apart hole on rail to line up standard studs; Max door weight capacity: 230lbs; Fit Door Thickness 1-3/8" 1-3/4; Fit two 60?

Wide door; 6 inches clearace needed above your door; - [HEAVY DUTY STURDY AND SAFE] - High standard Premium quality carbon steels is applied to create most sturdy barn door hardware kit. The high quality steel, anti-scratch high temperature fine black powder coated surface and heavy duty 1/4 thick carbon steel rail and roller arms will last a long time, 8.8 grade Self-tapping screws and roller screws make our hardware kit can hold two 230lbs doors comfortably. [SUPER SMOOTH AND QUIET] - Polymer nylon wheels ensure your barn doors glides along the track silently and smoothly.

Lifetime lubricated bearings made with high quality steel for maximum wheel fluency and stability, past 120,000 times opening and closing test hanging a 230lbs door. [UNIQUE ONE RAIL DESIGN] - Time & Space Saving Hardware: It? S simplistic and super efficient to use when there is insufficient space.

Brand new hardware kit brings a feasible solution when an ordinary double door bypass kit would fail. Get rid of overmuch component, bulky bracket, time consuming assembly and unhappy result, and make the installation quicker and easier.

[EASY AND HASSLE-FREE INSTALLATION] - Easy to follow Step-By-Step installation manual include graphic, text & inch unit. WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty. The item "WINSOON 10FT Single Rail Bypass Barn Door Hardware Double Doors Kit, Heavy Duty" is in sale since Tuesday, May 19, 2020. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware".

The seller is "usa*stores" and is located in US. This item can be shipped to United States.


Homepage    Sitemap    Contact Form    Privacy Policy    Service Agreement