Two-side soft closing hardware kit. Hardware Material:Steel, Nylon, POM. Two-side soft close mechanisms had been pre-fixed on the track to make full system easy for installation.
The soft close mechanism we offered for this item is adjustable which is very thoughtfull. The MAX load for soft close piece is 80kgs.
Track had been pre-drilled 16" apart holes, can be used for 16" apart studs wall. Two sides of the track's end also pre-drilled small screw holes for customer who what to creat 10ft double sliding barn door system. A connector can be offered free if you need it! Tips:pls re-move two stops on the middle of the track if you want to creat double door system. Full set hardware's including.Roller2pcs Stops2pcs 5FT track1pcs Track&wall connector4pcs Soft close kit2 sets Floor guide2pcs Anti-pad2pcs Bolts/Alle key1 set. The J shape material is metal. The spoke wheel is hard plastic/nylon. All of our barn door wheel is hard plastic to reduce the noice during sliding.
The height from top of the door to the top of the roller is 188mm(7.4), pls check if your wall have enough space to install this kit before order! The gap between door and wall is 16mm(0.63). 5FT track is one piece track and pre-drilled 16 apart holes. Can be used for studs wall that length between two studs are 16. 5FT track kit can be used for door width up to 29 1/2.
Easy installation for non wooden frame around openning. If baseboard/wooden frame thickness less than 3/5, easy installation as photo 1 left side. If baseboard/wood frame thickness more than 3/5, please add a thick gasket or wooden board on the back side of the track as photo 2.
How to install soft close track system. How to install barn door hardware: Step1: Drill holes on the wall H is door panel's height, H+45MM(1.77) is the place we need drill holes for track to tight screws. Step2: Adjust the soft close mechanism's location to make two teeth visiable from the front side of the track(see step 7 on the photo manuel), then tight the track on the wall Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Install floor guide on the floor under the groove of the door panel Step7: Move two soft close mechanism's teeth like option 1 Close the door, tight the T trigger on the bottom of the mechanism's teeth.
Open the door, tight the T trigger on the bottom of the mechanism's teeth. Step8: Mount two stops of the two end of the track.
The item "Two-Side Close/Soft Open Industrial Wheel Sliding Barn Door Track Hardware Kit" is in sale since Thursday, March 5, 2020. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "sliding-barn-door" and is located in Carol Stream, Illinois. This item can be shipped to United States, Australia.