Including: Roller:4pcs; Stopper:4pcs; 6ft/6.6ft sliding track:2pcs; track connector:1pcs; L ceiling mount bracket:8pcs; Floor guide:2pcs. Including: Roller:4pcs; Stopper:4pcs; 8ft sliding track:2pcs; track connector:1pcs; L ceiling mount bracket:10pcs; Floor guide:2pcs. Ceiling mount bracket barn door track kit mainly suitable for the openning that don't have enough space to install wall mount track. The kit only suitable for door thickness:35-40mm(1.37"-1.57") Pls make sure your ceiling is strong enough to hang door panel Our track had been pre-drilled holes for ceiling bracket. Step to install ceiling barn door kit: Step 1: Prepare door panel and hardware: Door panel's height is ceiling height-14mm, pls use thickness 40mm door panel.Drill two holes on the door panel and cut a groove on the bottom of the door. (See our posted drawing photo) Step 2: Fix rollers on the door panel.
Step 3: Put two stops on the track and found a best place before install ceiling bracket. Step 4: Fix track on the ceiling: Release the screws on the ceiling bracket and fix half part(round) on the track, the other part(L) tight on the ceiling. A:release the little screws on the round part, put the cyliner piece inside of the track then tight the screws, pls see attached photo. Bstand the door up and found a best place on the ceiling to install L part bracket(you can decide the gap between door and wall). C:tight the L part on the ceiling, then put two bracket parts together.Step 5: Install floor guide. The item "Stainless steel ceiling mount bracket double sliding barn wood door hardware" is in sale since Sunday, March 25, 2018. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware".
The seller is "beileli_0" and is located in Carol Stream, Illinois. This item can be shipped to United States.