SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single

SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single
SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single

SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single Rail, Stainless Steel, Smoothly and Quietly, Simple and Easy to Install, Fit 36'-40' Wide DoorPanel (T Shape Hanger). WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience. SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time.

Save the cost of finding a Carpenter or decoration team. PACKAGE INCLUDED: A Barn Door Hardware Kit 1x 6.6FT Rail, 5x Rail spacers, 2x Rollers, 2x Door stops, 2x End caps, 1x Floor Guide, 1x Hex Key; All other necessary hardware is included as you see in the pictures. DOOR WEIGHT CAPACITY: 220 lb, Fit door panel Width: 36'- 40', Fit door panel thickness: 1 3/8' and 1 3/4'. THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. Q: How to ensure the stability and safety of the door? Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and theyre cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.

Those little round discs- go on top of the door and won't allow door to be lifted off rail unless they're turned. Q: When do you need a headboard? If the studs don't line up with the pre-drilled holes in the rail. If there is a doorway trim. Q: How much space do I need above the doorway?

A: You will need a minimum of 5' from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door!

The bolts included for attaching the hangers to the door support a thickness range of 1 3/8' to 1 3/4', but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below.

2''- door depth - trim depth. If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.

Min Space Needed Above Door. Pre-Drilled Hole Distance of Rail. Overall pretty happy with this barn door hardware. The great thing is that you don't have to rely on your studs being perfectly in place to use this bar.

Our house is pretty old and has some funny stud locations. In particular, for our bathroom the only solid studs I could find were like 22' apart! As you can see in the pictures I only used 3 of the mounts and that was plenty. As a matter of fact, the middle bar mount is just using a drywall mount and isn't even going into a stud. Installation was pretty straightforward but was still kind of a pain to get everything level and I did have to use several of the shims included to bring it out from the wall on the last bar mount so the bar could side in easily.

The one thing I was a bit disappointed about was the noise made when opening and closing the door... Sounds a bit like grinding of metal to metal but what I found was that one of the rolling mounts must have been tightened down too much from the factory so the center mounting spot of the wheel was grinding against the face of the wheel. Since I used a standard door I had a bit of a gap at the bottom and used an aluminum U-Channel screwed to the bottom of the door as a guide... Well made and fantastic price.

This is super nice, high quality hardware, easy to install, just drill it 2 above the desired door height, leave 1/2 for bottom clearance and that it. Very nice kit, part of the install can be tricky and may require special tools. Overall this is a very nice kit.

High quality parts, sharp looking contemporary take on classic barn door hardware. The instructions are ok for the most part except that they say that the pole is pre drilled every 16 and thats not true, no holes are pre-drilled in the poll and none are needed.

The wall mounts can be moved to be mounted anywhere on the poll (which is a good thing but is contrary to what the instructions say). The instructions also say you need to use a headboard but I didnt use one and it came out great IMO. The only other complaint I have is that in order to use the included floor guide you need route a slot into the bottom of the door, and a router is not something most people have just sitting around the house.

I used my circle saw to do it but it was not easy and pretty dangerous. For my install I got lucky that there was a wood stud in wall right where I needed it on one side so my pole goes into the wall through a wood studd which holds the weight of the door without a problem. The other side of the poll I was able to mount to the wall where my studs happen to be rather than having to use dry wall ankers whcih came with the kit that I seriously doubt would hold the weight of the door. On a whole most of the install was easy except the floor guide which requires a hammer drill and masonry screws to mount to a ceramic tile over concrete floor and to rout a slot in the bottom of the door. The door slides very smoothly.

Nice looking and working great. Very easy to install, door moves back and forth with no effort at all. We hung 2 small doors for our bathroom.

We found this mount to be heavy duty and well made! Beautiful hardware, absolutely no customer service though. No response to my message whatsoever.

How wide your door opening is plus 4 inches! One of the easiest sliding door hardware kits to install! Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us.

An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. Orders are processed immediately and dispatched to fulfillment as soon as they are received.

If the order has gone too far through the fulfillment process, we will be unable to cancel. The item "SMARTSTANDARD 6.6FT Top Mount Heavy Duty Sliding Barn Door Hardware Kit, Single" is in sale since Friday, February 22, 2019. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "direct-js" and is located in 01501. This item can be shipped to United States.

Homepage    Sitemap    Contact Form    Privacy Policy    Service Agreement