We now provide free track length customization service for you. No matter how long you want the track to be, such as 9ft 6in, 12ft 3in...
Our professional blacksmith is here to cut the track for you. Simply order a track length option that is right above your desired track length and let us know the exact length you want.
For example, if you want 12ft 3in, order the 13ft and tell us to cut it down to 12ft 3in for you. Besides the standard black nylon wheels, we now have metal wheels and wood wheels. The metal wheels are more durable and can hold much heavier door weight. If you have a heavy door, choose the metal wheel to get another layer of security. The wood wheels however, is not as strong as metal wheels but it gives you a more natural feelings for your barn doors.
Q1: What is the width and thickness of the track? A1: The width is 1 1/2'' and the thickness is 1/4''.Q2: What is the material of the roller wheel? A2: The roller wheel is made of nylon to reduce the rolling noises to the minimum level. Q3: Is it one-piece single track or connected by multiple shorter tracks? A3: Tracks 8ft and under are one single track instead of being connected by multiple shorter tracks.
Tracks 9ft and above will be connected by two tracks. Therefore, the spacing in the middle may not be 16''. Q1: What is the maximum door weight the track can stand? A1: You can hang doors up to 220lbs for a complete set of hardware. If you have a super heavy door, we recommend you put a header board, put more hangers for this door or switch the nylon wheels to our metal wheels for better security.
Q2: What is the compatible door thickness? A2: The hardware is compatible with door thickness from 1 3/8'' to 2''.
Q3: How do I know the length of track I need for my opening? A3: Usually we recommend the track length to be at least double the total door width or the openning.
For example, if you have two doors that are each 30'' wide. You will need 2 (30''+30'') = 120'' long track. Or if you have a opening that is 48'' wide, you will need at least 96'' long track. Q1: What is the minimum clearance required?
A1: In most cases, you need to have at least 6'' clearance (from top of the door to the ceiling). Some type of rollers require clearance less than 6'', you can find the accurate clearance requirement in the product images.Q2: What is the spacing between each pre-drilled holes? A2: The spacing is now the American Standard spacing of 16''. Q3: What should I do if I have a door trim? A3: You can either put a header board about the same thickness or ask for the spacer extenders from us to push the door further away from the wall. QUALITY IS 100% UNDER CONTROL.
We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off.The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weight up to 200 lbs. FULLY OPTIMIZED CONNECTING AND SPACING. I understand how frustrated it was when you opened the box and found out multiple smaller tracks that were hard to line up and connect. Even worse when the spacing was not exactly 16 inches. Ve got them all figured out! The spacing is now exactly 16 inches. Track 8FT and under is only one piece track. Track 9FT and above is connected by two tracks using a junction plate, thus, the spacing between the middle two holes may not be 16 inches. BARN DOOR HARDWARE INSTALLATION MADE EASY.
You hate to see vague installation manual that is just one piece of paper with hard to read measurements, badly drawing pictures and barely any word instructions? Fortunately, in our installation manual, you will see the step by step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions.
You are going to have a pleasant time while installing a sliding door at your home. We provide track sizes from 4FT to 20FT with reasonable price. We also improved our packaging to make sure you will get everything you need in a timely manner! No more hassle to go back and forth for the missing or replacement parts. YOU ARE FULLY COVERED BY OUR PROFESSIONAL CUSTOMER SERVICE TEAM.
As a company in the US, our professional customer service team are here to ensure your satisfaction with our products and quick response to any questions. We do NOT accept P.BOXES - PLEASE PROVIDE A PHYSICAL ADDRESS. ######xA0;We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country.
In case it's not stated in the description, do ask us. We guarantee that your issue will be solved quickly.
We usually respond within 24 hours on weekdays. The item "Homacer Sliding Barn Door Hardware Standard Double Door Kit, 5.5FT Flat Track" is in sale since Friday, September 27, 2019. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware".The seller is "itz4everyone" and is located in Rockport, Massachusetts. This item can be shipped to United States.