Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door's gap. Track had been pre-drilled 16" apart holes, can be used for 16" apart studs wall. The bypass system need drill 3 line holes on the wall. It's very important to double check the level to make all of them in same height.
Door panel need to pre-cut a groove(Width 3/5";Height 1") , pls let your door maker finish this job when you order the door. Hardware Only, Not including Door Panel. 5ft/5.5ft bypass kit including. 6ft/6.6ft bypass kit including.
How to install bypass system. Prepare door panel and hardware. Door panel pre-cut groove, Groove Height:1"Width:3/5".
Prepare gasket or wooden board/thick spacer if you have thick frame/baseboard. Step1:Drill holes on the wall. H is door panel's height, H+43MM(1 7/10) is the place we need drill holes for innner track. Step2:Double check the level of the holes, then tight the inner track on the wall with spacer. Step3:Drill holes on the door panel (see photo manuel step 3) and fix the wheels.Step4:The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track). Step5:Hang wheels on the track. There are 2 "L" bypass bracket, the 3-hole L is connector with outter track, 4-hole L is tight on the wall. First, fix two L brackets together with bolts.
Second, put the whole bracket on the wall to find the hole on the wall for 4-hole bracket, then tight the screws(The 3-hole bracket is on same level with the inner track). Third, fix the outter track/spacer together with the 3-hole bypass bracket to get outter track installed. Step8:Fix the anti-pad on the outter door.
Step9:Install floor guides under the door panel groove. Step10:Fix stops on the end of the track.
Hardware suitable for door thickness 40-45mm. The bypass bracket can be istalled as normal L shape and new N shape. The height from top of the door to the top of the L shape bracket is 11.6(296mm). For N shape bracket is 6-7/10. Pls make sure you have enough space install as L bracket.
N shape bypass also reduced the gap between two door panels from 2" to 1-3/5";Highly recommend installed as N shaped. Pre-drilled 16 apart holes on track, Two rollers can bear MAX weight 90kg. The item "DIYHD Rustic black bypass double sliding barn Wood door hardware bypass kit" is in sale since Friday, September 28, 2018. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "shengyinhardware" and is located in Carol Stream,IL.
This item can be shipped to United States.