DIYHD Top Mount Bypass Double Sliding Wood Door Track Hardware Kit for Low Ceiling. Hardware Only, Not Including Door Panel. Hardware suitable for door thickness:1 3/8"1 3/4";Top mount hardware also can work with door thickness 2;Please adjust roller's location of the top of the door for thick door panel. 2pcs rollers can hold 1 door MAX weight 198lbs.5FT track can work with openning width 58. Please make 2 door panel's total width wider than openning. 2 door panels can both slide to left and right side freely. 5ft track2+track wall connector8+bypass connector4. The height from top of the door to the top of the bypass bracket is 5 7/8;Please leave enough space for installation. The gap between 2 door panel is about 1 3/10" based on door thickness 1 3/5";Please use thicker door panel(es:1 3/4) to reduce the gap between 2 doors.
Door panel's width should be wider than openning width. There's a overlapping on the middle of 2 doors, Please add at least 2 on each side of the door to cover the openning. Floor guides will keep door panel straight. 10ft bypass kit cluiding: roller4, stopper4,5FT track4, track connector2;track&wall connector16, bypass connector8, anti-pad4, floor guide2. The item "DIYHD Black Top Mount Bypass Double Sliding Barn Wood Door Track Hardware" is in sale since Sunday, July 21, 2019.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "shengyinhardware" and is located in Carol Stream, Illinois. This item can be shipped to United States.