(5) Spacers, used to keep space between the wall and the track. (1)Roller Hanger, made of steel hanger and nylon wheel with ball bearing makes your door move stably and in low noise.(2) Door Stops, used to adjust and control the rolling distance. (1) Floor Guide, to prevent door from shifting, door bottom groove is required. (2) Anti-jump blocks, prevent hanger wheels from jumping off the track.
(1) Hex tools and all hardware fasteners. All parts tested with salt water spray. The length of track should be at least twice of width of door panel. The space between door top and roller top is 7-11/16 inch, Please leave enough space from your ceiling. The recommended gap between door and wall is about (11/16" to 1-1/16") which depends on door thickness.Only the hardware is for sale. This Track Kit applies to 36 door.
Track can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide.This kit is probably Not for door trim or door casing, otherwise you may need a header(a solid wood board) for enough clearance. Your advice is welcome at any time. The item "6.6ft 1 Rail Black Sliding Barn Door Hardware Flat Track Set Sunrise at Home" is in sale since Friday, August 10, 2018. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "barndoorfactorydirect" and is located in Plainfield, Indiana. This item can be shipped to United States.