Heavy duty sliding door track kit is constructed of powder coated metal with strong water and rust resistance, making it a durable and solid sliding door accessory for your long term use. High strength tracks and pulleys can easily hold up to 300 lbs loads. Humanized designs provide you the supreme use experience.Great sliding door accessory can be used both indoors and outdoors. High quality and brand new. Suitable for both wood doors and concrete walls. Made of high quality steel, this set can bear wet and fumes for years of use. Heavy duty construction, Barn door hardware set for sliding wood door. Necessary hardware for setting up the sliding barn door is included.
Material: High quality carbon steel. For Use With Openings Up To 70.8. Door Thickness: From 1 5/8" To 1 3/4" (40mm-45mm). 4 X Rollers + 8 x Screw & nut. Q: How thick of a door will this kit work with?A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. 2''- door depth - trim depth. If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then mount the rail onto the header board. Q: How to ensure the stability and safety of the door?
Door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they're cushioned by rubber caps for a quiet close. The T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Those little Anti-jumpers go on top of the door and won't allow door to be lifted off rail unless they're turned. Q: Can I cut the rail to fit my place?You can customize your own sliding track! We recommend the use of an angle grinder. Q: How much space do I need above the doorway? You will need a minimum of 6 clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How to deal with if the studs don't line up with the pre-drilled holes in the rail? Attach a 1 thick header board to your studs first, and then mount the rail onto the header board. You can paint the header board to match the wall or the door color. Q: How to deal with if there is a doorway trim? Attach a header board with the same thickness as your doorway trim to your stud first, and then mount the rail onto the header board.
We will try our best to change it for you. Your recognition is our power to move forward. If you are dissatisfied for any reason, please do not be quick to leave negative or neutral feedback. At bottom of this item page.
We will answer within 24 hours. The item "12FT Double Sliding Barn Door Hardware Track Kit WithRollers Closet Heavy Duty New" is in sale since Tuesday, November 26, 2019. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware".
boutique" and is located in Independence, Missouri. This item can be shipped to United States.